查看“(SKU:ELB060415)3路MOS管场效应管驱动模块 IRF540”的源代码

[[image:3MOS.jpg|thumb|right|400px|]]

==简介==

采用原装IRF540功率MOS管，可以进行PWM调节输出 
可以让Arduino驱动高达24V的负载，如LED灯带、直流马达、微型水泵、电磁阀 
用过PWM调可以实现LED无级调光、马达无级调速。
<pre style="color:red">
注意：驱动1A以上的负载需安装散热片
</pre>

==产品参数==

*尺寸：69.4*41.7mm
*固定孔：3mm
*孔距：2400*1300mil（60.96*33.02mm）
*电压：3.3V、5V
*端口：数字量电平
*输出负载电压：0-24V
*输出负载电流：<6A (1A以上需加散热片)
*平台：Arduino、单片机、ARM、树莓派

==使用教程==
[[File:3MOSLINE.jpg|1000px|]]
[[File:3MOS1LINE.jpg|1050px|]]

===样例代码1===
<pre style="color:blue">
int led1 = 9;
int led2 = 10;
int led3 = 11;

void setup() {
  pinMode(led1, OUTPUT);
  pinMode(led2, OUTPUT);
  pinMode(led3, OUTPUT);
}

void loop() {
  digitalWrite(led1, HIGH);  
  delay(1000);              
  digitalWrite(led1, LOW);
  digitalWrite(led2, HIGH); 
  delay(1000);
  digitalWrite(led2, LOW);  
  digitalWrite(led3, HIGH); 
  delay(1000);
  digitalWrite(led3, LOW);  
}
</pre>

===样例代码2===
<pre style="color:blue">
#define LEDR 9
#define LEDB 11
#define LEDG 10
int i = 0;

void setup() {
  pinMode(LEDG, OUTPUT);
  pinMode(LEDB, OUTPUT);
  pinMode(LEDR, OUTPUT);
}

void loop() {
  analogWrite(LEDR, 255);
  analogWrite(LEDB, 255);
  analogWrite(LEDG, 255); //off
  analogWrite(LEDR, 0);
  delay(1000);    //hong
  analogWrite(LEDG, 220);
  delay(1000);   //cheng
  analogWrite(LEDR, 0);
  analogWrite(LEDG, 120);
  delay(1000);   //huang
  analogWrite(LEDR, 255);
  analogWrite(LEDG, 0);
  delay(1000);   //lv
  analogWrite(LEDB, 0);
  delay(1000);   //qing
  analogWrite(LEDG, 255);
  analogWrite(LEDB, 0);
  delay(1000);   //lan
  analogWrite(LEDR, 0);
  analogWrite(LEDG, 255);
  delay(1000);   //zi
  analogWrite(LEDG, 0);
  delay(1000);   //bai

  analogWrite(LEDR, 255);
  analogWrite(LEDB, 255);
  analogWrite(LEDG, 255); //off

  for (i = 255; i > 0; i--) {
    analogWrite(LEDR, i);
    delay(10);
  }
  for (i = 255; i > 0; i--) {
    analogWrite(LEDG, i);
    delay(10);
  }
  for (i = 0; i < 255; i++) {
    analogWrite(LEDR, i);
    delay(10);
  }
  for (i = 255; i > 0; i--) {
    analogWrite(LEDB, i);
    delay(10);
  }
  for (i = 0; i < 255; i++) {
    analogWrite(LEDG, i);
    delay(10);
  }
  for (i = 255; i > 0; i--) {
    analogWrite(LEDR, i);
    delay(10);
  }
  analogWrite(LEDG, 0);
  analogWrite(LEDB, 0);
  analogWrite(LEDR, 0);
}
</pre>

==更多==
[YWRobot产品资料下载]
<br>

购买 [https://item.taobao.com/item.htm?spm=a1z10.5-c.w4002-11865952969.21.uxIs5J&id=530911513946 YWRobot商城购买链接]
<br><br>