(SKU:BRD0800051) Tentacle 温度传感器电子积木模块适用于Micro:bit

来自YwRobot Studio Wiki
跳转至: 导航搜索
Tentacle 温度传感器电子积木模块适用于Micro:bit

简介

温度传感器,可以用来对环境温度进行定量的检测。
与Micro:bit专用传感器扩展板结合使用,可以非常容易地实现与环境温度感知相关的互动效果。

产品参数

  • 名称:Tentacle 温度传感器
  • 尺寸:30*30mm
  • 重量:4g
  • 电压:3-3.3V
  • 输出:模拟量信号
  • 接口:鳄鱼夹接口
  • 温度范围:-40℃- +125℃
  • 精度:0.5℃
  • 封装:TO-92
  • 平台:Micro:bit

使用教程

Tentacle 温度传感器连接.jpg

样例代码

#include <OneWire.h>
#include <Wire.h>
#include <LiquidCrystal_I2C.h>

LiquidCrystal_I2C lcd(0x27,16,2);
OneWire  ds(10);

void setup() { 

  lcd.init();
  lcd.backlight();
  lcd.setCursor(0,0);
  lcd.print("DS18B20 Texting...");
  Serial.begin(9600);
}

void loop(void) {
  byte i;
  byte present = 0;
  byte type_s;
  byte data[12];
  byte addr[8];
  float celsius, fahrenheit;
  
  if ( !ds.search(addr)) {
    Serial.println("No more addresses.");
    Serial.println();
    ds.reset_search();
    delay(250);
    return;
  }
  
  Serial.print("ROM =");
  for( i = 0; i < 8; i++) {
    Serial.write(' ');
    Serial.print(addr[i], HEX);
  }

  if (OneWire::crc8(addr, 7) != addr[7]) {
      Serial.println("CRC is not valid!");
      return;
  }
  Serial.println();
 
  // the first ROM byte indicates which chip
  switch (addr[0]) {
    case 0x10:
      Serial.println("  Chip = DS18S20");  // or old DS1820
      type_s = 1;
      break;
    case 0x28:
      Serial.println("  Chip = DS18B20");
      type_s = 0;
      break;
    case 0x22:
      Serial.println("  Chip = DS1822");
      type_s = 0;
      break;
    default:
      Serial.println("Device is not a DS18x20 family device.");
      return;
  } 

  ds.reset();
  ds.select(addr);
  ds.write(0x44,1);         // start conversion, with parasite power on at the end
  
  delay(100);     // maybe 750ms is enough, maybe not
  // we might do a ds.depower() here, but the reset will take care of it.
  
  present = ds.reset();
  ds.select(addr);    
  ds.write(0xBE);         // Read Scratchpad

  Serial.print("  Data = ");
  Serial.print(present,HEX);
  Serial.print(" ");
  for ( i = 0; i < 9; i++) {           // we need 9 bytes
    data[i] = ds.read();
    Serial.print(data[i], HEX);
    Serial.print(" ");
  }
  Serial.print(" CRC=");
  Serial.print(OneWire::crc8(data, 8), HEX);
  Serial.println();

  // convert the data to actual temperature

  unsigned int raw = (data[1] << 8) | data[0];
  if (type_s) {
    raw = raw << 3; // 9 bit resolution default
    if (data[7] == 0x10) {
      // count remain gives full 12 bit resolution
      raw = (raw & 0xFFF0) + 12 - data[6];
    }
  } else {
    byte cfg = (data[4] & 0x60);
    if (cfg == 0x00) raw = raw << 3;  // 9 bit resolution, 93.75 ms
    else if (cfg == 0x20) raw = raw << 2; // 10 bit res, 187.5 ms
    else if (cfg == 0x40) raw = raw << 1; // 11 bit res, 375 ms
    // default is 12 bit resolution, 750 ms conversion time
  }
  celsius = (float)raw / 16.0;
  fahrenheit = celsius * 1.8 + 32.0;
  lcd.setCursor(0,1);
    lcd.print("Tep:        C");
    lcd.setCursor(5,1);
    lcd.print(celsius);
    delay(200);
}



更多

[YWRobot产品资料下载]

购买 YWRobot商城购买链接