(SKU:SEN030201)Arduino电子积木 震动传感器

来自YwRobot Studio Wiki
跳转至: 导航搜索
Arduino电子积木 震动传感器



产品参数

  • 名称:震动传感器
  • 尺寸:25*21mm
  • 电压:3.3V、5V
  • 输出:数字电平
  • 接口:Arduino 3P接口SVG
  • 平台:Arduino


产品特性

  • 有震动时模块输出电平信号
  • 可用于震动检测、报警器制作
  • 资料丰富,便于学习


使用教程

  • (SKUSEN030201)Arduino电子积木 震动传感器连线.jpg

样例代码

/*
  Blink
  Turns on an LED on for one second, then off for one second, repeatedly.

  This example code is in the public domain.
 */

// Pin 13 has an LED connected on most Arduino boards.
// give it a name:
int led = 13;

// the setup routine runs once when you press reset:
void setup() {
  // initialize the digital pin as an output.
  pinMode(led, OUTPUT);
}

// the loop routine runs over and over again forever:
void loop() {
  digitalWrite(led, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(1000);               // wait for a second
  digitalWrite(led, LOW);    // turn the LED off by making the voltage LOW
  delay(1000);               // wait for a second
}

'''实验结果''':控制板上的D13口LED(带有L标识)闪烁,时间间隔1秒。

更多

[YWRobot产品资料下载]

购买 YWRobot商城购买链接